● Article 8 Car logo: 1972-1984

　　When it was sold to Birmingham Company in aston martin in 1972, because the helm of the company was changed to William Willson, the word "David Brown" appeared on the aston martin logo was obviously inappropriate, so a new aston martin logo was born. In addition to the letter "David Brown", the feathers on the logo were "combed" again, the lines on the inner and outer layers were connected into a whole, and the background of the logo turned light blue. This logo was first installed on V8 models after 1972. Subsequently, the V8 and models also used brand-new logos.

　　Since 1974, aston martin has been in turmoil again. In 1975, it was taken over by North American Peter Sprague and Canadian George Minden. In 1981, it was taken over by a private oil company led by Victor Gauntlett; In 1983, it was 100% acquired by the American distributor Automobile Investment Alliance; In October 1984, the Peter Livanos family owned 75% of the shares, and Victor Gauntlett owned the remaining 25%. It was not until 1987, when Auto acquired 75% of aston martin’s shares, that aston martin’s fate was temporarily calmed down. In 1994, Ford owned Aspen.
All the shares of don Martin.

● The ninth logo of aston martin: 1984-2002

　　During the turbulent years in aston martin, the logo of aston martin has undergone a change, which was in 1984, after the Peter Livanos family owned aston martin. At that time, the models produced in aston martin were still V8 and V8 Vantage. In that year, the 10,000 th model of aston martin rolled off the assembly line, so aston martin put on a brand-new logo. Of course, the change of this logo is still "changing the soup without changing the medicine", mainly for the internal lines and borders of the logo feathers. The interior of the logo has become more concise and the borders have become silver again.

　　After entering Ford, aston martin began to develop and launch a large number of new models. Not only did the DB naming method, which had been stopped for nearly 20 years, be re-launched in 1993, and DB7, DBS, DB9 and other models were launched respectively, but also brand-new V8, V8 Vantage, V8 Zagato and other models were launched, and the sales volume also increased gradually. In a few short years, the sales volume of aston martin was higher than the sum of the models produced in the past 80 years.

● Aston martin Tenth Car Logo: 2003-Up to now

　　2003 is an unusual year for aston martin, which is not only the 90th anniversary of the founding of aston martin Company, but also the new V8 Vantage released by aston martin at the north american international auto show held in Detroit, Michigan, USA, which reintroduced the classic V8 and greatly enhanced the company’s market competitiveness. At the same time, the DB9 model came out, replacing the DB7 model for ten years. In addition, in the same year, a new factory was established in Gordon, England, becoming the first professional factory in the history of aston martin. It was also in this year that the latest generation logo of aston martin, which you see now, was born.

　　The last time aston martin changed hands was in 2007, when a consortium led by British David Richards bought it from Ford at a cost of $959 million. That is to say, aston martin has returned to her native Britain again after years of travelling in other countries.

● The centenary of aston martin: 2013.

　　Today, all the models in aston martin still carry the logo of DB9. At the same time, on September 29th last month, aston martin also launched a centennial logo (only used by Aston Martin brand to celebrate its centenary birthday in 2013), which was designed by Marek Reichman, the design director of Aston Martin, and will be put into use in 2013 to commemorate the glorious centennial history of this classic luxury brand.

Summary:

　　In fact, since the second logo of aston martin, all the logos have kept a theme, that is, spreading a pair of wings, which was very popular in the era when the automobile industry just started. Today, after nearly a hundred years of ups and downs and evolution, aston martin logo is still full of design sense, and it is not out of date, and the previous design style has been completely passed down. Of course, it is not only the logo design that has been passed down, but also the brand of "high-quality car with high performance and perfect appearance" produced in aston martin. (Text/Figure Zhang Wenjun)

> > Click on car home Culture Team to enter the interesting world of automobiles < <

　　China news agency, Beijing, October 4 (Reporter Ruan Yulin) Li Ganjie, Minister of Environmental Protection of China, stressed during his investigation in Beijing, Tianjin and Hebei and surrounding areas during the 11th National Day that since the beginning of this year, the air quality in some places has fluctuated, and the improvement rate of air quality has obviously slowed down or even rebounded, making it very difficult to complete the set goals and tasks for the whole year. It is necessary to strengthen environmental law enforcement supervision and promote the effectiveness of various measures to prevent and control air pollution.

　　The Ministry of Environmental Protection announced on the 4th that Li Ganjie led a team to Hebei, Shanxi, Shandong, Henan and other places for investigation from October 1st to 3rd. Bulk coal combustion has become an important factor affecting the quality of atmospheric environment in northern China in winter, and it is also a weak area in the current air pollution control in China.

　　Li Ganjie pointed out that it is urgent to solve the problem of bulk coal heating. We must adhere to the principle of replacing coal with gas, replacing coal with electricity and replacing high-quality coal simultaneously, and continue to promote it according to the principle of adapting measures to local conditions, implementing it step by step and taking multiple measures simultaneously.

　　To promote Beijing-Tianjin-Hebei and surrounding areas in 2017&mdash; In the comprehensive control of air pollution in autumn and winter of 2018, Li Ganjie proposed to maintain a high-pressure situation and strengthen environmental law enforcement and supervision. Since the beginning of this year, the air quality situation in some places has fluctuated, and the improvement of air quality has slowed down obviously, or even rebounded. It is very difficult to complete the set goals and tasks for the whole year. It is necessary to strengthen environmental law enforcement and supervision, urge all localities to increase environmental governance, and promote the effectiveness of various measures to prevent and control air pollution.

　　At the same time, it is necessary to strictly quantify the assessment accountability and promote the pressure transmission in place. Conscientiously implement the "five-step method" of supervision, assignment, inspection, interview and special inspection, fully complete all the objectives and tasks of "Atmosphere Ten", and resolutely fight the blue sky defense. (End)

? ? ? ? ? ? Many car owners are buying Xpeng Motors for the first time, some are pure novice users, and they are not familiar with all kinds of buttons on the car. In addition, the minimalist design of Tucki similar to Tesla, many users say that they can’t use it, so it’s hard to remember, and their heads are so big! ! !

? ? ? ? ? ?Today’s most detailed graphic tutorial, here he comes! Hand in hand to teach you the usage of MONA M03 buttons. It is recommended to save them and look at them often to ensure that you can use them quickly without making mistakes! ! !

? ? ? ? ? 1. The first scene, the buttons on the steering wheel, the intelligent adjustment and the use of lighting, are used the most and must be mastered!

? ? ? ? 2. Second, double flashing lights and reading lights, put down in the back row, in case of emergency, such as high-speed breakdown, be sure to know where it is and turn it on at the first time! ! !

? ? ? ? ?3. Adjust the seat button and the glass lifting switch!

? ? ? ?4. Air conditioning adjustment in the back row, as well as charging port and small storage box under the trunk!

? ? ? ?5. It is our biggest feature, how to open and close the electric hatchback door, and how to set your own default opening height to avoid rubbing on it!

? ? ? ? That’s all for today’s sharing. Have you all learned? Novices must remember the meaning and usage of each key to travel safely on the road! ! !

? ? ? Finally, I wish all new friends a happy Mid-Autumn Festival! ! !

　　The Spring Festival of the Year of the Tiger is coming to us, and the flavor of the Year is getting stronger and stronger. On January 15th, CCTV released the main visual image of the 2022 Spring Festival Gala. The main visual image consists of a Tiggo and the words "2022" and "Spring Festival Gala of CCTV", and the overall color is mainly red and golden yellow, which highlights the festive and heavy traditional festivals. Mr. Chen Xiangbo, vice chairman of Guangdong Artists Association and chairman of Shenzhen Artists Association, specially designed the image of a cute tiger for the 2022 Spring Festival Evening of the reception desk as the logo of this year’s Spring Festival Evening.

　　The Spring Festival Gala in 2022 is under intense preparation. The gala will highlight the main tone of "happiness, auspiciousness and jubilation", adhere to the principle of "keeping integrity, innovating and making new achievements", enthusiastically depict the grand atmosphere of the new era and new journey in the festive atmosphere, and present a "reunion, reunion and unity" for the global audience.

　　The Sichuan provincial government issued a number of important policies in November. Among them, it involves many areas of people’s livelihood, such as pilot implementation of information benefiting the people, natural disaster relief, pioneering Sichuan action, national scientific quality action, high-definition Sichuan smart radio and television, and other important issues in economic development, such as Tianfu quality award selection management, rural one-two-three industry integration development, agricultural supply-side structural reform, Chengdu Tianfu International Airport Airport Airport Airport Economic Zone, accelerating the promotion of industrial product quality brand, and working rules of Sichuan Tianfu New District Management Committee.

The General Office of the Provincial Government issued the "Implementation Plan for Promoting" Internet+Government Services "in Sichuan Province to Carry out Information Benefiting the People Pilot Project"

　　A few days ago, the General Office of the Provincial Government issued the "Implementation Plan for Promoting" Internet+Government Services "in Sichuan Province to Carry out Information Benefiting the People Pilot Project" (hereinafter referred to as the "Plan"), and made it clear that by 2017, Chengdu, Mianyang and Neijiang, three national pilot cities for information benefiting the people, will initially realize "one application, one window acceptance and one network service" for government services across regions, levels and departments, and urban management, people’s livelihood and public services will basically be realized.

　　The "Proposal" proposes to promote cross-departmental, cross-regional and cross-level information sharing as the starting point, optimize service processes, smooth service channels and innovate service models, and actively promote comprehensive services such as online service, one-stop service, nearby service and city-wide service, and accelerate the realization of three major changes …[View Details]

　　View file:Notice of the General Office of the People’s Government of Sichuan Province on Printing and Distributing the Pilot Implementation Plan for Promoting "Internet+Government Services" in Sichuan Province to Carry out Information Benefiting the People

"Sichuan Tianfu Quality Award Selection Management Measures" was issued.

　　On December 1st, the "Management Measures for Sichuan Tianfu Quality Award Selection" will be officially implemented, marking a new step in the quality development of our province.

　　According to the measures, Tianfu Quality Award is managed dynamically, and there are three situations, namely: serious violations of discipline or major quality and safety accidents; The quality supervision and spot checks of all levels and departments are unqualified; Consumers (users) have a strong reaction to the quality (service), and there are major complaints from customers, employees, suppliers, society and other interested parties, and they are subject to administrative punishment by the relevant departments, and their awards will be revoked, honorary certificates, medals and bonuses will be recovered and publicly notified. The predecessor of Tianfu Quality Award is Sichuan Quality Award. "After the name change, it is conducive to the deep integration of Bashu culture, historical elements and quality elements …[View Details]

　　View file:Notice of the General Office of Sichuan Provincial People’s Government on Printing and Distributing the Management Measures for the Selection of Sichuan Tianfu Quality Award

The general office of the provincial government issued the "Implementation Opinions on Promoting the Integration and Development of Rural Primary, Secondary and Tertiary Industries"

　　The "Implementation Opinions on Promoting the Integration and Development of Rural Primary, Secondary and Tertiary Industries" issued by the General Office of the Provincial Government recently proposed to accelerate the cultivation of diversified industrial integration subjects and actively promote the integration and development of the entire agricultural industry chain.

　　Our province will innovate and carry out the training and certification system of agricultural professional managers, actively promote the business models of "land joint-stock cooperatives+agricultural professional managers+socialized services" and "large parks+small farms", encourage farmers to establish farmers’ cooperatives and land joint-stock cooperatives by converting land contractual management rights into shares, and encourage leading enterprises to focus on developing agricultural products processing, circulation, e-commerce, rural tourism and agricultural socialized services in rural areas, especially in poverty-stricken areas …[View Details]

　　View file:Opinions of the General Office of Sichuan Provincial People’s Government on Promoting the Integrated Development of Rural Primary, Secondary and Tertiary Industries

The General Office of the Provincial Government issued the Action Plan for Promoting the Structural Reform of Agricultural Supply Side and Accelerating the Green Development of Agricultural Innovation in Sichuan.

　　The "Action Plan for Promoting the Structural Reform of Agricultural Supply Side and Accelerating the Green Development of Agricultural Innovation in Sichuan" issued by the General Office of the Provincial Government recently proposed that by 2020, the moderate scale operation rate of land in the province will increase by 7.5 percentage points, the comprehensive mechanization rate will increase by 10 percentage points, the contribution rate of agricultural science and technology will reach more than 60%, and the comprehensive vegetation coverage of grassland will reach 85%, basically achieving the obvious improvement of the supply capacity of safe agricultural products such as "one control, two reductions and three basics" and "three products and one standard".

　　Our province will focus on structural reform of agricultural supply side by adjusting structure, improving quality, promoting integration, reducing costs and making up shortcomings. While continuously improving agricultural infrastructure and equipment conditions, we will make overall plans to promote moderate scale operation, effective product supply, industrial integration development, application of scientific and technological achievements, brand building and market development …[View Details]

　　View file:Notice of the General Office of Sichuan Provincial People’s Government on Printing and Distributing the Action Plan for Promoting the Structural Reform of Agricultural Supply Side and Accelerating the Green Development of Agricultural Innovation in Sichuan Province

The revised Emergency Plan for Natural Disaster Relief in Sichuan Province was officially issued and implemented.

　　On November 10th, the reporter was informed that the revised Emergency Plan for Natural Disaster Relief in Sichuan Province was officially issued and implemented. The Emergency Plan for Natural Disaster Relief in Sichuan Province issued by the General Office of the provincial government on July 24, 2012 shall be abolished at the same time. "Compared with the original plan, the new plan reflects the support of the higher-level government to the lower-level government in disaster relief." The person in charge of the office of the Provincial Disaster Reduction Committee said.

　　The new plan adjusted specific indicators such as the number of deaths. The new plan clearly States that "Level 4 response will be started when more than 10 people are killed and less than 20 people are killed", while the original plan is "Level 4 response will be started when more than 10 people are killed and less than 30 people are killed" …[View Details]

　　View file:Notice of the General Office of Sichuan Provincial People’s Government on Printing and Distributing the Emergency Plan for Natural Disaster Relief in Sichuan Province

The General Office of the Provincial Government issued the Planning Outline of Chengdu Tianfu International Airport Airport Airport Economic Zone.

　　With the construction of Chengdu Tianfu International Airport in full swing, the airport economic zone around the airport construction will also be rolled out. The reporter was informed that the general office of the provincial government issued the Outline of Chengdu Tianfu International Airport Airport Airport Economic Zone Planning (referred to as the Outline), which was divided into 10 parts, put forward the overall requirements for building an airport economic zone, clarified the spatial layout, and put forward six development priorities and safeguard measures to ensure the smooth implementation of the plan. What are the specific contents of the Outline? What industries will be focused on? Let’s take a look.

　　What will the airport economic zone look like in the future? In the "Outline", the development goals and strategic positioning of Chengdu Tianfu International Airport Airport Airport Economic Zone are clearly explained. The "Outline" clarifies that the planned total area of the airport economic zone is 298 square kilometers, which consists of Chengdu area and Ziyang area. The planning period is from 2016 to 2020 …[View Details]

　　View file:Notice of Sichuan Provincial People’s Government on Printing and Distributing the Planning Outline of Chengdu Tianfu International Airport Airport Airport Airport Economic Zone

Sichuan issued the Implementation Plan of Entrepreneurial Sichuan Action (2016-2020).　

　　By 2020, there will be 700 incubators in the province, 200 creative spaces will be added, and the number of invention patents per 10,000 people will reach 7.5 … Recently, Sichuan has issued the Implementation Plan for Entrepreneurial Sichuan Action (2016-2020). How will the "Program" stimulate the vitality of innovation and entrepreneurship, and how will it mobilize the enthusiasm of the public? Can we create a situation in which we want to create opportunities and create opportunities, thus releasing greater vitality for economic development? The reporter takes you to see how the "Entrepreneurial Sichuan Action" moves!

　　As far as the goal is concerned, the "Proposal" proposes that by 2020, Sichuan will form an incubation and cultivation system covering all cities (states) and counties (cities, districts) in the province; Form an entrepreneurial talent community with young college students, scientific and technological personnel in colleges and universities, scientific and technological workers in enterprises, entrepreneurs from overseas returnees, and grassroots talents as the main body …[View Details]

　　View file:Notice of the General Office of the People’s Government of Sichuan Province on Printing and Distributing the Implementation Plan of Entrepreneurial Sichuan Action (2016-2020)

The General Office of the Provincial Government issued the Implementation Plan for the Outline of the Action Plan for the Scientific Literacy of the Whole People in Sichuan Province (2016-2020).

　　By 2020, the level of science and technology education, popular science facilities at the grass-roots level, popular science service ability and popular science resource development ability in our province will be significantly improved, and the proportion of citizens in the province with scientific quality will reach about 8%. This is the goal put forward in the "Implementation Plan for the Outline of the Action Plan for Scientific Literacy of the Whole People in Sichuan Province (2016-2020)" recently issued by the general office of the provincial government. To this end, the "Implementation Plan" takes science popularization informatization as the breakthrough point and the scientific quality action of key groups as the key point, and deploys 10 key tasks.

　　The "Implementation Plan" clearly states that our province will vigorously implement the "internet plus Popular Science" campaign. In this action plan, we will build a popular science service cloud in Sichuan, guide the construction of a popular science ecosystem of crowd-creation, crowd-sourcing, crowd-support, crowdfunding and sharing, and promote the formation of a "two-level construction and four-level application" popular science information service system …[View Details]

　　View file:Notice of the General Office of the People’s Government of Sichuan Province on Printing and Distributing the Implementation Plan (2016-2020) of the Outline of the Action Plan for the National Scientific Literacy in Sichuan Province

The general office of the provincial government issued the "Implementation Opinions on Accelerating the Promotion of Industrial Product Quality Brand"

　　A few days ago, the general office of the provincial government issued the "Implementation Opinions on Accelerating the Promotion of Industrial Product Quality Brands", proposing that by 2020, the quality competitiveness index of industrial products in our province will be stable in the top 10 in the country, and more than 100 Sichuan-made brand enterprises will be cultivated to promote the transformation of enterprises from product competition and price competition to quality competition and brand competition.

　　In terms of product quality improvement, it is required to improve the quality level of enterprises, take technological innovation as the starting point for enterprises to improve quality, and reverse the situation of emphasizing manufacturing over research and development, emphasizing introduction over digestion, and emphasizing imitation over innovation; Improve the product quality supervision system, implement the classification supervision system, establish and improve the quality and safety traceability system, and establish a quality blacklist system; Establish a number of measurement standards urgently needed for the development of manufacturing industry, and set up the Sichuan manufacturing standard system …[View Details]

　　View file:Notice of the General Office of Sichuan Provincial People’s Government on Printing and Distributing the Implementation Opinions on Accelerating the Promotion of Industrial Product Quality and Brand

The Working Rules of Sichuan Tianfu New District Management Committee (Trial) and the Working Rules of Sichuan Tianfu New District Management Committee Office (Trial) were issued.

　　The reporter was informed that the Working Rules of Sichuan Tianfu New District Management Committee (Trial) and the Working Rules of Sichuan Tianfu New District Management Committee Office (Trial) were issued a few days ago, which clarified the main responsibilities, main tasks, meeting system, office and working mechanism of Sichuan Tianfu New District Management Committee and its office.

　　According to the Working Rules of Sichuan Tianfu New District Management Committee (Trial), the main duties of Sichuan Tianfu New District Management Committee are to study and approve important issues and policies to promote the economy, society, culture, reform and innovation, ecological construction and environmental protection of Sichuan Tianfu New District, and to consider and decide the annual key work arrangements for the economic and social development of Sichuan Tianfu New District. The rules also clarify that the management Committee implements a system of plenary meetings and special meetings. In principle, the plenary meeting will be held once every six months …[View Details]

　　View file:Notice of the General Office of Sichuan Provincial People’s Government on Printing and Distributing the Working Rules of Sichuan Tianfu New District Management Committee (Trial) and the Working Rules of Sichuan Tianfu New District Management Committee Office (Trial)

The "Special Reform Plan for Building" High Definition Sichuan Smart Radio and Television "in Sichuan Province" was officially released.

　　Recently, the "Special Reform Plan for Building" High Definition Sichuan Smart Radio and Television "in Sichuan Province" was officially released. It is planned that by 2020, the creation and production of press, publication, radio, film and television content, modern public services, modern communication, technical support and industry supervision system will be basically completed, and Sichuan will be transformed from a big press, publication, radio, film and television province to a strong one. People in Sichuan will also enjoy the brand-new experience brought by "HD Sichuan Smart Radio and Television" in terms of sight, hearing, film, sound and reading.

　　By 2020, the press, publication, radio, film and television will realize high definition in content production, transmission channels, production and broadcasting platforms and receiving terminals, and establish the implementation standard of high definition in Sichuan. Provincial radio and television stations and Chengdu Radio and Television Station have realized high-definition production and broadcasting, and other city (state) radio and television stations have built more than one set of high-definition channels …[View Details]

　　View file:Notice of the General Office of the People’s Government of Sichuan Province on Printing and Distributing the Special Reform Plan for the Construction of "High Definition Sichuan Smart Radio and Television" in Sichuan Province

The provincial government issued the Sichuan National Fitness Implementation Plan (2016-2020).

　　A 15-minute fitness circle will be built in urban communities, and indoor and outdoor fitness venues will be built in newly-built communities … On November 29th, the reporter learned from the Sichuan National Fitness Implementation Plan (2016-2020) issued by the Sichuan Provincial People’s Government that in the next five years, Sichuan will focus on implementing the project of benefiting the people through sports, and co-ordinate the construction of a national fitness public service system, industrial chain and ecological circle. By 2020, the number of people who participate in physical exercise once or more a week in the province will reach 40 million, the number of people who regularly participate in physical exercise will reach 27 million, and the total scale of sports industry will reach 80 billion yuan.

　　With the acceleration of urbanization and the improvement of people’s demand for a healthy life, many people suddenly find that the venues and equipment available for fitness around them …[View Details]

　　View file:Notice of the People’s Government of Sichuan Province on Printing and Distributing the Sichuan National Fitness Implementation Plan (2016-2020)

　　This article is reproduced by Yi Heng Nutrition: eb_nutrition.

　　We may have the common sense that if ripe bananas are put in green fruits, the fruits will ripen quickly.

　　Immature fruits are "green" and generally hard but not sweet. "Green" comes from chlorophyll, "astringent" comes from tannin, while "hard" is mainly the function of pectin, and "not sweet" is because starch has not been converted into sugar.

　　one

　　How do fruits ripen?

　　When it is ripe, plants will produce a substance called ethylene-this substance is "phytohormone". As soon as ethylene is produced, all parts of the fruit begin to join the mature "battle":

　　There are enzymes to decompose chlorophyll and new pigments are produced, so green disappears, while red and yellow represent mature colors;

　　Some kinases decompose acids and make fruits neutral;

　　Amylase hydrolyzes starch into sugar to produce sweetness; The arrival of pectinase decomposes some pectin, which makes the fruit soft;

　　There are also some enzymes that decompose certain compounds in fruits and release certain gases, so different fruits have different flavors. …

　　The rapid development of science and technology in modern society gives us a more convenient and effective way to store fruits.

　　two

　　Which methods can effectively extend the storage period of fruits?

　　Once the fruit is ripe, even if it is picked, the internal biochemical reaction is still difficult to contain, such as the sugar in the fruit is converted into alcohol and the fruit is further softened … What we see with the naked eye is that the fruit is rotten, and the rotten fruit often has a "wine smell". This process happens very quickly, such as bananas, which only takes a few days.

　　When bananas are harvested when they are very raw and placed at the slowest temperature for ethylene production (scientists have found that the temperature is 13℃-14℃), they can be stored for a long time without rotting. If there is a material that can adsorb ethylene in the packaging box or box, it will be more helpful to control the concentration of ethylene lower and greatly extend the storage time.

　　We often see high-grade fruits wrapped in paper or foam, which is not only for good-looking or "high-grade". Just as the human body will have a defensive reaction when it is stimulated by the outside world, which will lead to changes in some physiological indexes, the "injured" fruit will also stimulate the secretion of ethylene.

　　In the process of transportation, it is inevitable that the fruits jostle with each other. Although it is only a minor injury, it is enough to make them produce more ethylene, accelerate maturity and decay, and the softening of maturity makes them more vulnerable. Good packaging reduces the chance of injury and helps to reduce losses.

　　three

　　How do we "ripen" fruits at home?

　　Generally speaking, bananas, apples, grapes and other fruits are ripened before distribution. However, mangoes, persimmons, kiwis, etc. may be put on the shelves without ripening or ripening.

　　If you buy such fruits, the easiest thing is of course to wait patiently for them to "grow old", but we can have a better way. Because apples and bananas can produce a considerable amount of ethylene, putting them together with the fruits to be ripened, whether pears, persimmons, mangoes or kiwis, can play a certain role in ripening.

　　Because bananas are easy to go bad, and ethylene is mainly produced by banana peel, you can also eat bananas and put only banana peel.

　　In addition, in theory, damaging fruits will promote the release of ethylene. In the folk, there is a practice of inserting straw on persimmons to make them soft. Therefore, it may also help to accelerate the ripening and softening of the fruit by pricking some scars on the irrelevant parts (such as the pedicles) or directly putting the broken fruit on the bag.

　　Probably the best choice is to eat first and buy now.

　　-THE END-

　　How to contribute by running friends:

　　Enter the word "contribute" in WeChat official account and you will receive an automatic reply.

　　Hot content

　　Wechat personal number of running girl who loves sports

　　ipb42195

　　Please contact for offline running activities and competition execution planning cooperation.

Recently, Jetway’s new car, the 2024 Jetway X95, went on the market! Positioning as a medium-sized SUV, two models have been launched, with the price range of 175,800-178,800 yuan. The new car is an annual model. What is the product strength? Take a closer look!

First of all, in terms of appearance, the new car adopts a family-style design language. The front face is a polygonal air intake grille, and the interior is filled with a blackened honeycomb structure. With the headlights on both sides, the internal structure is clearly visible, which is very eye-catching after lighting. The lower enclosure is a three-stage design, with diversion grooves on both sides and an air inlet in the middle, all of which are blackened and have a strong sporty atmosphere.

The luggage rack is designed on the side of the car body and the roof to increase practicality. The suspended roof, with segmented waistline, plus five-piece wheels, further enhances the sports attributes. The lower edge of the window is inlaid with chrome trim strips, which is more delicate. The inner concave treatment is carried out under the door, which makes it more layered. In terms of body size, the length, width and height of the new car are respectively4858/1925/1780mm, with a wheelbase of 2850mm.

At the rear of the car, the roof is designed with a duckling tail, which is matched with a spoiler and a high-position brake light, which is more sporty. The taillights are of split design, and the internal structure is clearly visible, which is very eye-catching after lighting. The license plate area is slightly concave, which is more layered. The rear enclosure is wrapped in a black plaque, which is full of movement with the diffuser shape. In terms of exhaust, the design of two outlets is adopted.

In terms of interior, the central control adopts a dual screen composed of full LCD instrument and central control screen, which is full of science and technology. Coupled with the three-position steering wheel and shifting mechanism, the driving atmosphere is good. In terms of material, a large number of leather materials are used to wrap, combined with exquisite stitching, and the texture is comfortable.

In terms of configuration,19-inch rims are standard.laneDeviation warning, tire pressure display, front/rear parking radar, reversing image, 360-degree panoramic image, cruise control, automatic parking, driving mode selection, openable panoramic sunroof, roof rack, 12.3-inch LCD instrument, keyless entry, wireless charging of mobile phone,Leather seat, 12.3-inch central control panel, LED far and near lightLights, automatic headlights,Automatic anti-glare interior rearview mirror, air outlet of rear air conditioner, manual air conditioner, etc.

In terms of power, the new car is equipped with a 1.6T turbocharged engine with a maximum power of 145 kW and a maximum torque of 290 Nm. In terms of transmission, it is matched with 7 speeds.Wet dual clutch gearbox.

On the whole, the appearance of the new car is fashionable and dynamic, the interior technology is online, coupled with the configuration and power, the product is remarkable. Considering the price, what do you think of this car? Welcome to leave a comment!

　　Among thousands of automobile parts, almost every one plays a vital role, and automobile glass is no exception. For the daily car, although we may turn a blind eye to the car glass, the quality of the car glass will directly affect our driving comfort and even driving safety.

　　Not long ago, Aika Automobile was held.China brand annual vehicle selection activity,Assembled 115 China brand vehicles listed in China this year (from July 16th, 2016 to July 5th, 2017), and with a fair, professional and innovative perspective and thinking,Choose the "Best of the Best" brand in China.In this activity, the car channel conducted a centralized survey on the glass of 14 popular China brand models. How did they perform?

　　Many car owners have a blind spot for car glass, thinking that car glass is enough as long as it has a good view, but this is not the case. In addition to having a good view, the structure, thickness, blocking rate and transmittance of automobile glass also have great influence on driving comfort and safety, which is directly related to the personal safety of drivers and passengers. Before publishing the survey results, let’s learn some basic knowledge about automobile glass.

　　1. Types of automobile glass

　　According to the material, automobile glass can be divided intoTempered glassandLaminated glassTwo types, and according to the different installation positions, the automobile glass is used.Types and specificationsThere will be differences.

　　(1) Tempered glass

　　Tempered glass is formed by tempering ordinary glass, which not only increases its strength, but also changes its internal structure to some extent.

When the glass breaks due to destructive external impact, the tempered glass will break into particles, reducing the possibility of injury.

　　(2) Laminated glass

　　Laminated glass consists of2 or more floorsGlass is glued together, and its safety comes from the PVB film between the glasses. When the glass is broken, the PVB film will stick the glass fragments together, so that the glass fragments will not be scattered and hurt people, and the driver can have a certain vision to deal with emergencies.

　　2. Car glass logo

Usually, the logo of this glass will be printed on the car glass. By reading these logos, you can know the brand, structure, specifications and production date of this glass.

　　(1) automobile manufacturers;

　　(2) glass manufacturers;

　　(3)3C certification mark;

　　(4) Safety certification code of automobile glass manufacturer;

　　(5) The code of the member countries of the Economic Commission for Europe that issued the certificate of non-mandatory standards for automobile parts;

　　(6) stands for the adoption of EU Regulation No.43, and 001477 stands for product certification code;

　　(7) Factory date of glass: the number represents the year, and 5 represents the production in 2015. The black dot on the left of the number represents the factory month, the black dot on the left represents the first half of the year, and the black dot on the right represents the second half. If there are a few black spots on the left, subtract a few from 7. As shown in the figure, if there is a black spot, subtract 1 from 7 to equal 6, that is, this glass was produced in June 2015. If the black dot is on the right side of the number, subtract a few black dots from 13.

The front windshield of Haval H8 is made of laminated glass of FY, which has passed Dutch certification and the factory date is September 2016.

　　Fuyao Glass is a domestic automobile glass manufacturer with large scale, high technical level and large export volume. The "FY" trademark is the only "China well-known trademark" in China automobile glass industry so far.

　　(2) Side window glass

The side window of Haval H8 is composed of two door glasses and two triangular window glasses. The window glass is made of tempered glass from Wuhan Yaohua pilkington (WYP), which passed the British certification and was manufactured in March 2017.

　　Although you may not pay attention to the triangular window at ordinary times, in fact, this piece of glass may be several times more expensive than the two side window glasses. This is because the possibility of the triangular window glass being broken is relatively small, so there are fewer replaceable auxiliary factory glasses, and the price will naturally be much higher after the original monopoly.

　　(3) Rear windshield

The rear windshield of Haval H8 also uses tempered glass from Wuhan Yaohua pilkington (WYP), which has passed the British certification and has the function of heating and defogging. The factory date is February 2017.

　　Actually, it’s on a modelUse different brands in different locations.It’s normal that some hot-selling models are in great demand, and often the capacity of an accessory factory is not enough to meet the demand of the main engine factory. Moreover, sometimes the main engine factory will not only cooperate with the same supplier in order to avoid the risks caused by equipment failures or product permissions of suppliers.

　　(4) Thickness of side window glass

　　（5）Barrier rate and transmittance of side window glass

We measured the light transmittance of the side window with a light tester, and the results showed that the ultraviolet blocking rate was 50.6%, the infrared blocking rate was 68.5%, and the visible light transmittance was 82.7%.

　　2、WEY VV7

The front windshield of WEY VV7 is made of FY laminated glass, which has passed Dutch certification and the factory date is May 2017.

　　(2) Side window glass

The side window of WEY VV7 consists of two door glasses and a triangular window glass. The window glass is made of laminated glass of French brand Saint-Gobain, which was delivered in April 2017, and the rear row is privacy glass.

　　Saint Gobain is a famous French glass enterprise, which provides safety glass for 50% cars in Europe.

　　(3) Rear windshield

The rear windshield of WEY VV7 is the same as the side window glass. It uses laminated glass of Saint-Gobain, passed Dutch certification, and the factory time is April 2017.

　　(4) Thickness of side window glass

In the side window glass thickness test, the actual test result of WEY VV7 is 4.26mm, which is slightly thicker than Wuhan Yaohua pilkington (WYP) glass used by Haval H8.

　　（5）Barrier rate and transmittance of side window glass

We measured the light transmittance of the side window with a light tester, and the results showed that the ultraviolet blocking rate reached 100%, which was excellent. At the same time, the infrared blocking rate was 57.2% and the visible light transmittance was 88.5%.

The front windshield of Roewe i6 is laminated glass of Jiangsu Iron Anchor, a domestic brand, which has passed Dutch certification. The factory date is September 2016, and AS1 stands for glass with a light transmittance of at least 70%.

　　(2) Side window glass

The side window glass of Roewe i6 is made of toughened glass, which is also from Jiangsu Iron Anchor. It has passed Dutch certification, and the factory date is December 2016. The light transmission rate of AS2 stands for glass is not less than 70%.

　　(3) Rear windshield

The rear windshield is also made of tempered glass and has the function of heating and defogging. The factory time is September 2016.

　　(4) Thickness of side window glass

　　（5）Barrier rate and transmittance of side window glass

We measured the blocking rate and transmittance of the Roewe i6 side window with a light tester, and the results showed that the blocking rate of ultraviolet rays was 9.6%, the blocking rate of infrared rays was 15.8%, and the transmittance of visible light was 95.6%, so the glass had an average blocking ability to ultraviolet rays.

The front windshield of Qoros 3 GT is made of laminated glass from FY, which has passed the Dutch certification and the factory date is September 2016. AS1 stands for glass with a light transmittance of at least 70%.

　　(2) Side window glass

The side window glass of Qoros 3 GT is made of tempered glass of Japanese brand Asahi Glass (AGC), which has passed Belgian certification. The factory date is August 2016, and the light transmission rate of AS2 stands for glass is not less than 70%.

　　Founded in 1907, Asahi Glass Corporation (AGC) is a Japanese glass manufacturing company, and its parent company is Mitsubishi Group, which is the second largest glass manufacturing company in the world. Asahi glass products are all kinds of glass products and semi-finished products. At present, the sales targets are manufacturers, automobile industry, lamps industry, construction industry and so on.

　　(3) Rear windshield

The rear windshield is also made of tempered glass made of Asahi Glass (AGC), which has passed Belgian certification. The factory date is August 2016, and it has the function of heating and defogging.

　　(4) Thickness of side window glass

In the side window glass thickness test, the actual test result of Qoros 3 GT is 3.60mm, which is slightly thinner than the tempered glass of Jiangsu iron anchor selected by Roewe i6.

　　（5）Barrier rate and transmittance of side window glass

We measured the blocking rate and transmittance of the side window of Qoros 3 GT with a light tester. The results showed that the blocking rate of ultraviolet light was 45.3%, the blocking rate of infrared light was 67.0%, and the transmittance of visible light was 85.9%.

The front windshield of Chuanqi GS8 is laminated glass from FY, which has passed Dutch certification and the factory date is May 2017.

　　(2) Side window glass

The side window of Chuanqi GS8 is composed of two door glasses and two triangular window glasses. The window glass is made of tempered glass, also from FY, which has passed the Dutch certification. The factory date is May 2017, and the back row is privacy glass.

　　(3) Rear windshield

The rear windshield is also made of tempered glass of FY, which has passed the Dutch certification. The factory date is May 2017, and it has the function of heating and defogging.

　　(4) Thickness of side window glass

　　（5）Barrier rate and transmittance of side window glass

We measured the blocking rate and transmittance of Chuanqi GS8 side window with a light tester. The results showed that the blocking rate of ultraviolet light was 43.6%, the blocking rate of infrared light was 65.3%, and the transmittance of visible light was 85.1%.

The front windshield of Damai X7 is laminated glass from Shanghai Yaopikang Bridge, which has passed Dutch certification and the factory date is April 2017.

　　(2) Side window glass

The side window glass consists of two door glasses and a triangular window glass. The window glass is made of tempered glass, which is also from Shanghai Yaopi Kangqiao Automobile Glass Co., Ltd. and passed the Dutch certification. The factory date is May 2017.

　　(3) Rear windshield

Damai X7′ s rear windshield uses tempered glass of the same model as the side window glass, which has passed Dutch certification, and the factory date is May 2017, with the function of heating and defogging.

　　(4) Thickness of side window glass

　　（5）Barrier rate and transmittance of side window glass

The light tester is used to measure the blocking rate and transmittance of the side window of Damai X7. The results show that the blocking rate of ultraviolet light is 51.1%, the blocking rate of infrared light is 68.2%, and the transmittance of visible light is 82.7%.

　　Cctv news Recently, many places in Fujian have distributed epidemics. Recently, many places in Fujian have distributed epidemics. Fujian Big Data Co., Ltd. (hereinafter referred to as "Fujian Big Data") has implemented the work requirements of "fast, accurate, strict, practical and detailed" put forward by the provincial party committee, and leveraged big data to go all out to strengthen the information support force for epidemic prevention and control in the province, and help the province to carry out accurate epidemic prevention and scientific control.

　　To this end, they take many measures simultaneously, mainly including:

　　First, promote the platform construction and continuously optimize and upgrade. Fujian Big Data promotes the improvement of health code ability, builds Fujian health code, builds a unified large-scale nucleic acid detection system in the province, develops an integrated management platform for epidemic prevention and control in the province, and realizes many functions such as "one record and four pushes" of positive patient information, closed-loop information flow adjustment, key personnel monitoring, decision analysis and so on.

　　The second is to strengthen the basic support capacity and deploy and expand in advance. Fujian big data should be deployed in advance, and the number of concurrent codes per second of the eight Fujian health codes can reach 11,000, which can be expanded within 5-10 minutes. Fujian Health Code has established a dedicated public network link, and realized the resource specialization in government cloud, with the concurrent number of bright codes reaching 53,800 per second. The large-scale nucleic acid detection system establishes a dedicated public network link, which can increase to 3038 services per second and complete the sample collection of 48 million people within 5 hours.

　　The third is to improve the operation and maintenance guarantee mechanism to ensure safety and stability. Fujian Big Data has formulated targeted safeguard measures and emergency dispatch mechanisms, coordinated the support forces of manufacturers, and ensured the safe and stable operation of epidemic-related platforms. Strengthen organizational guidance and clarify work responsibilities and operational mechanisms. Establish an operation and maintenance monitoring center and hotline traffic system, with two shifts of day shift and night shift, with specific personnel responsible, and ensure the stable operation of health code 24 hours a day. Formulate emergency response guarantee mechanism, organize emergency drills, and realize emergency switching rotation of Fujian health code parallel operation.

Fuzhou citizens lined up in an orderly manner and registered for nucleic acid testing with Fujian health code. Photo by Wang Dongming

　　The fourth is to improve operational service capabilities and promote efficient operation. Improve the customer service channel, collect problems and follow up to solve them, so as to answer questions, help in case of difficulties and solve doubts. Fujian Big Data provided system training services, with a total of 14,699 people trained, which promoted the unified application of large-scale nucleic acid detection systems in the province, provided system function consultation and system process guidance, and handled 16,093 nucleic acid system consultations. Deploy a public opinion situation awareness system, pay close attention to the epidemic situation and public opinion orientation, output an analysis report on public opinion related to the epidemic every day, focus on people’s livelihood concerns and put forward work suggestions to relevant departments related to the epidemic.

　　Fujian Big Data opened a 400-666-1331 customer service hotline, which is responsible for hotline customer service, demand parts, and transcoding.

　　Fujian Big Data is fully committed to consolidating the effectiveness of epidemic prevention and control work. In the spirit of waiting for time and waiting for it, it is strict and careful to support and guarantee all the work of epidemic prevention and control information, help to weave the province’s epidemic prevention and control network, and protect the people’s lives and health. The person in charge of the company said, "Our work is a great responsibility at any time and has a long way to go." (Chen Lixia)